EasyManuals Logo

Audio Technica ATH-CKS50TW User Manual

Audio Technica ATH-CKS50TW
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Charging the battery
13
3
Connect the included USB charging cable (USB Type-A side) to the computer to start charging.
While charging, the four charging indicator lamps light/flash as follows. (It may take several seconds for the
charging indicator lamps to light.)
Charging indicator lamp Status
Flashes/lights in white (the four
charging indicator lamps light or flash
according to the battery level).
Charging
Lights in white for 10 seconds, and
then turns off.
Charging complete
All four indicator lamps flash white
quickly.
Charging error
[1]
[1] The charging case or headphones may be hot. Allow the temperature of the product to cool sufficiently before charging in a well-ventilated
place (10 to 35°C (50 to 95°F)) away from direct sunlight.
4
When charging is complete, disconnect the USB charging cable (USB Type-A side) from the
computer.
5
Disconnect the USB charging cable (USB Type-C side) from the product’s battery jack.
When charging, make sure to use the included USB charging cable. The product may not charge with
cables other than the included USB charging cable.
Always make sure the headphones are not wet before charging. The headphones may not operate correctly
or may not turn on if they are wet. Wipe the headphones with a dry cloth, shake them multiple times to
remove any excess water, and allow the headphones to dry thoroughly before charging.
Charging headphones without the USB charging cable
A rechargeable battery is built into the charging case. If you have charged the charging case, you can charge the
headphones without using the USB charging cable.

Other manuals for Audio Technica ATH-CKS50TW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Audio Technica ATH-CKS50TW and is the answer not in the manual?

Audio Technica ATH-CKS50TW Specifications

General IconGeneral
Headset typeBinaural
Product typeHeadset
Product colorBlack
Wearing styleIn-ear
Recommended usageCalls/Music
Impedance16 Ω
Driver typeDynamic
Driver unit10 mm
Ear coupling-
Headphone frequency5 - 40000 Hz
Maximum input power10 mW
Headphone sensitivity110 dB
Battery typeBuilt-in battery
Battery voltage3.7 V
Charging sourceUSB
Battery operatedYes
Battery recharge time2 h
Continuous audio playback time15 h
Battery recharge time (charging case)3.5 h
Operating temperature (T-T)5 - 40 °C
Microphone typeBuilt-in
Microphone frequency50 - 4000 Hz
Microphone sensitivity-40 dB
Microphone direction typeOmnidirectional
Cables includedUSB Type-A to USB Type-C
Frequency band2.402 - 2.480 GHz
Bluetooth version5.0
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyTrue Wireless Stereo (TWS)
Weight and Dimensions IconWeight and Dimensions
Charging case weight60 g
Left earpiece weight8 g

Related product manuals