EasyManuals Logo

Audio Technica ATH-CKS50TW User Manual

Audio Technica ATH-CKS50TW
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
12
Charging the battery
Fully charge the battery when using for the first time.
When the rechargeable battery is running low, the voice guidance will play the message “Low battery”, and the
indicator lamp will flash in red. Charge the battery as soon as possible.
It takes about 3 hours to fully charge the headphones, and about 3 hours to fully charge the charging case. (Charging
times may vary depending on usage conditions.)
Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Charging outside
the normal charging temperature range may result in failure to charge or longer charging time. Otherwise, the
battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.
Charging the headphones and charging case
1
Connect the included USB charging cable (USB Type-C side) to the battery jack.
The included USB charging cable is designed for exclusive use with the product. Do not use any other USB
charging cable.
When inserting the USB charging cable into the USB port or battery jack, insert it directly (horizontally).
1 2
1
USB Type-A
2
USB Type-C
2
Place the headphones in the charging case.
When charging the headphones, make sure the indicator lamps on the headphones light up. If they do not
light up, remove the headphones and place them in the case again.

Other manuals for Audio Technica ATH-CKS50TW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Audio Technica ATH-CKS50TW and is the answer not in the manual?

Audio Technica ATH-CKS50TW Specifications

General IconGeneral
Headset typeBinaural
Product typeHeadset
Product colorBlack
Wearing styleIn-ear
Recommended usageCalls/Music
Impedance16 Ω
Driver typeDynamic
Driver unit10 mm
Ear coupling-
Headphone frequency5 - 40000 Hz
Maximum input power10 mW
Headphone sensitivity110 dB
Battery typeBuilt-in battery
Battery voltage3.7 V
Charging sourceUSB
Battery operatedYes
Battery recharge time2 h
Continuous audio playback time15 h
Battery recharge time (charging case)3.5 h
Operating temperature (T-T)5 - 40 °C
Microphone typeBuilt-in
Microphone frequency50 - 4000 Hz
Microphone sensitivity-40 dB
Microphone direction typeOmnidirectional
Cables includedUSB Type-A to USB Type-C
Frequency band2.402 - 2.480 GHz
Bluetooth version5.0
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyTrue Wireless Stereo (TWS)
Weight and Dimensions IconWeight and Dimensions
Charging case weight60 g
Left earpiece weight8 g

Related product manuals