135
AVR21EN SPECIFICATIONS
Audio Section
Stereo Mode
Continuous average power (FTC): 100 Watts per channel, 20Hz–20kHz,@
<0.1%THD, both channels driven into 8 ohms
Seven-channel surround modes,
power per channel, all channels driven: 70 Watts per channel @ <0.1% THD,20Hz–
20kHz into 8 ohms
Input sensitivity/impedance
linear (High-Level): 200mV/47k ohms
Signal-to-noise ratio (IHF-A): 97dB
Surround system adjacent channel separation
Dolby® Pro Logic® I/II/IIx: 40dB
Dolby® Digital: 55dB
DTS®: 55dB
Transient Intermodulation Distortion (TIM): Unmeasurable
FM Tuner Section
Frequency range: 87.5–108.0MHz
Usable sensitivity: IHF 1.3μV/13.2dBf
Signal-to-noise ratio: mono/stereo 70/68dB
Distortion (mono/stereo): 0.2/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity: ±400kHz, 70dB
Image rejection: 80dB
IF rejection: 90dB
AM Tuner Section
Frequency range: 520kHz –1720kHz
Signal-to-noise ratio: 45dB
Usable sensitivity: loop 500μV
Distortion: 1kHz, 50% mod 0.8%
Selectivity: ±10kHz, 30dB
Video Section
Television format: NTSC
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response
Composite and S-video: 10Hz–8MHz (–3dB)
Component video: 10Hz–50MHz (–3dB)
General
Power Requirement: AC 120V/60Hz
Power Consumption:
Standby: 8.9W
Idle: 58W
Max (7channels driven): 1073W
To Next Page
Loading...