AudioBahn A2201Q - Controls and Functions; A1801 Q; A4401 Q;A4601 Q

Controls and Functions
___..._ “- . . -.~-“---.--. . ..--. - ~. .~. . -
_._-----~
-8
A4401Q j
A4601Q :
;-------------.---------.------------------------------~--------------~~~- ,
_ _ _ _ _’
A1801Q ;
.____________.._________________________~--~-----------------------------~-----.
GAIN
CONTROL
0
@
GN &
A2201 Q / A2301 Q i
A2401 Q / A2601 Q :
A2801Q/A3201Q a
A4401Q/A4601Q:
A6601 Q / Al 801 Q I
-------------~----------~--------------~----------.-.-----------~----------.--~
This control adjusts the amplifiers input sensitivity. Input sensitivity is variable from 200 Millivolts
to 7 volts. Clockwise increases sensitivity Counterclockwise decreases sensitivity.
This knob is not a volume control for the amplifier. The amplifier can be driven to full power
with a wide range of signal levels. A lower signal level will require increased sensitivity for full
power. A higher signal level will require decreased sensitivity.
9
_ _ .-. e ,-.-. -.
Controls and Functions
_ - ”
.._-. _.
___
I_____________--___________________
These inputs are for signal cables
frm
cables.
I__________________________________
The LINE OUT allows you to build multipll
to distribute the signal. Now it is simple 1
amplifier, then using the line out RCA ja
-~---...............--~---~-------
By using the bass boost function, bass
nm
FULL
-$j
___--.
.___-- _-.
,__-
______
Adjust the crossover for your chosen ins
- LPF : Low pass filter-only bass tones (i
Use with woofer or sub-woofer.
- FULL : No filter-all tones go to speaker!
- HPF : High pass filter-blocks very low 1
from the speakers.
x-c