Page | 10
10. Configuring Bluetooth
Note: This section is applicable only to models with Bluetooth functionality.
The Bluetooth interface is used to connect the phone to a wireless headset or speaker.
To pair and connect a remote Bluetooth device:
1. Press the phone’s MENU hard key, and then select the Settings option.
2. In the Settings screen, select the Bluetooth Settings option, and then in the Bluetooth Settings
screen, select the Bluetooth Scan option.
The phone starts scanning for Bluetooth devices if there are devices that are not paired:
3. When the scan finishes, the "Scan finished!!" message is displayed.
To Next Page
Loading...
