Page | 8
8. Connecting to a Router via Wi-Fi
Note: This section is applicable only to models with Wi-Fi functionality.
The phone can connect to an Access Point via Wi-Fi. The Wi-Fi interface can be used to make VoIP calls
over Wi-Fi, when the phone is installed in an environment free of LAN/cables.
If an Ethernet cable does not connect the phone to a LAN port, the phone displays a "LAN Link Failure"
message and a Networks softkey.
You can connect to Wi-Fi by:
Touching the Networks softkey in the phone’s main menu -or-
Navigating to the ‘Settings’ menu, and then selecting the Wi-Fi option.
9. Enabling or Disabling Wi-Fi
Note: This section is applicable only to models with Wi-Fi functionality.
To enable Wi-Fi:
1. Using the left and right rim of the navigation button on the phone, select Enabled (Wi-Fi is disabled
by default):
To Next Page
Loading...
