AudioCodes 450HD - Page 30

400HD Series IP Phones
Administrator's Manual 30 Document #: LTRT-11973
Parameter Description
random_provisioning_time and performs the check
only after the random time.
The valid range is 0-65535. The default value is 120.
provisioning/period/type Defines the period type for automatic provisioning:
 every5minutes Minimum definable time. Sets the
interval at every five minutes.
 every15minutes Sets the interval at every five
minutes.
 hourly - Sets an interval in hours.
 daily (default) - Sets an hour in the day.
 weekly - Sets a day in the week and an hour in the
day.
 powerup Irrespective of what value is defined, the
phone always checks on powerup, but if powerup is
defined, the phone will check only on powerup.
provisioning/period/hourly/hours_interval
The interval in hours for automatically checking for new
firmware and configuration files.
The valid range is 1 to 168. The default is 24.
Note: This parameter is applicable only when type is
configured to hourly.
provisioning/period/daily/time
The hour in the day for automatically checking for new
firmware and configuration files.
The format of this value is hh:mm, where hh is hour and
mm is minutes. For example, 00:30.
The default time is 00:00.
Note: This parameter is applicable only when type is
configured to daily.
provisioning/period/weekly/day
The day in the week for automatically checking for new
firmware and configuration files.
 Sunday (default)
 Monday
 Tuesday
 Wednesday
 Thursday
 Friday
 Saturday
Note: This parameter is applicable only when type is
configured to weekly.
provisioning/period/weekly/time
The hour in the day for automatically checking for new
firmware and configuration files.
The format of this value is: hh:mm, where hh is hour and
mm is minutes. For example: 00:30
The default time is 00:00.
Note: This parameter is applicable only when type is
configured to weekly.