AudioCodes Mediant 1000 User Guide

Fast Track Guide 7. Upgrading the Mediant 1000
Version 5.0 33 October 2006
6. When you have loaded all the required files, click Next until the ‘Finish’ screen appears
(refer to Figure
7-4). The Next button is disabled. Complete the upgrade process by clicking
Reset or Cancel.
• Click Reset, the Mediant 1000 ‘burns’ the newly loaded files to flash memory. The
‘Burning files to flash memory’ screen appears. Wait for the ‘burn’ to finish. When it
finishes, the ‘End Process’ screen appears displaying the burned configuration files
(refer to Figure
7-5).
• Click Cancel, the Mediant 1000 resets, utilizing the files previously stored in flash
memory. (Note that these are NOT the files you loaded in the previous wizard steps).
Figure 7-4: 'Finish' Screen
Figure 7-5: ‘End Process’ Screen
7. Click the End Process button; the ‘Quick Setup’ screen appears and the full Web application
is reactivated.

AudioCodes Mediant 1000 Specifications

General

Data link protocols	CAS: MF-R1: T1 CAS, ISDN PRI: ETSI/EURO ISDN, ANSI NI2, QSIG
Security algorithms	HTTPS, SRTP
Authentication method	RADIUS
Internal memory	512 MB
Built-in processor	Celeron 600 MHz
Processor frequency	600 MHz
Internal memory type	-
Number of processors installed	1
Voice codecs	G.711, G.723.1, G.726, G.729A, iLBC
Safety	UL60950-1, FCC 47 CFR
Certification	ETS 300019-2-1, ETS 300019-2-2 ETS 300019-2-3
Mounting type	Rack mounting
LED indicators	Yes
Power requirements	90-260 V AC

Weight and Dimensions

Size (imperial)	19 \