AudioCodes Mediant 1000B Quick Setup Guide

1 | Page
Mediant™ 1000B Gateway & E-SBC
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes Mediant 1000B Gateway and Enterprise Session Border
Controller (E-SBC), hereafter referred to as the device!
This document is intended to provide basic setup instructions for initial access to the device and for connecting
it to your network. For advanced configuration and cabling, refer to the User's Manual and Hardware Manual
respectively, which can be downloaded from AudioCodes website at
https://www.audiocodes.com/library/technical-documents.
Before you begin, please read the Safety Precautions on page 7.
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are shipped with your device:
 4 x anti-slide bumpers for desktop mounting
 1 or 2 x AC power cables (depending on order)
 Regulatory Information document

AudioCodes Mediant 1000B Specifications

General

Form Factor	1U
Ethernet Interfaces	2 x 10/100/1000 Base-T
VoIP Protocols	SIP, H.323
Power Supply	AC Power Supply
Power Supply Redundancy	Optional
Management Interfaces	Web, CLI, SNMP
Weight	4.5 kg (9.9 lbs)
Humidity	10% to 90% non-condensing
Type	VoIP Gateway
Interfaces	T1/E1, FXS, FXO
Ports	Up to 24 FXS/FXO
Network Interfaces	2 x 10/100/1000 Base-T Ethernet
Protocols	SIP, H.323, MGCP
Voice Codecs	G.711, G.729, G.723.1, G.726
Redundancy	Optional
Management	Web, CLI, SNMP
Operating Temperature	0 to 50 °C
Storage Temperature	-40°C to 70°C (-40°F to 158°F)