AudioCodes Mediant 500 Quick Setup Guide

1 | Page
Mediant™ 500 Gateway and E-SBC
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes Mediant 500 Gateway and Enterprise Session Border
Controller (E-SBC), hereafter referred to as device!
This document is only intended to provide basic setup instructions for initial access to the device and
connecting it to your network. For advanced configuration and cabling, refer to the device's User's Manual and
Hardware Manual respectively, which can be downloaded from AudioCodes website at
https://www.audiocodes.com/library/technical-documents.
Before you begin, please read the Safety Precautions on page 7.
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are included with your shipped device:
 4 x anti-slide bumpers for desktop mounting
 2 x mounting brackets for 19-inch rack mounting
 Serial cable adapter
 1 x AC power cable
 Regulatory Information document
 This document

AudioCodes Mediant 500 Specifications

General

Humidity	10% to 90% non-condensing
Protocols	SIP, H.323
Type	VoIP Gateway
Interfaces	E1/T1
VoIP Media Processing	G.711, G.723.1, G.726, G.729
Management	Web-based, SNMP, CLI
Ports	E1/T1, FXO, FXS, BRI
Voice Codecs	G.711, G.723.1, G.726, G.729
Echo Cancellation	G.168
DTMF	RFC 2833, SIP INFO, In-band
Fax Support	T.38
Operating Temperature	0°C to 40°C