Version 6.0 11 February 2010
Installation Manual 2. Installing the Device
2 Installing the Device
This section describes the device's hardware installation. This includes a physical
description of the device, unpacking the shipped package, and mounting and cabling
procedures.
2.1 Physical Description
The Mediant 600 is 1U high compact unit that can be installed in a 19-inch industrial rack
(using mounting brackets). The device supports Basic Rate Interface (BRI), PRI E1/T1,
FXS, and FXO interfaces, and can be supplied in one of the following hardware
configurations:
1 x E1/T1 port (can support also Fractional E1/T1)
2 x E1/T1 ports
4 x BRI ports (supporting up to 8 voice calls)
8 x BRI ports (supporting up to 16 voice calls)
4 x BRI ports and 1 x E1/T1 port
4 x BRI and 4 x FXS ports
4 x BRI and 4 x FXO ports
4 x FXS ports and 1 x E1/T1 port
4 x FXO ports and 1 x E1/T1 port
To Next Page
Loading...
