EasyManua.ls Logo

AudioCodes Mediant 600 - TRUNKS (E1;T1) Module; Port Description; LED Description; Figure 3-5: TRUNKS Module

AudioCodes Mediant 600
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Installation Manual 16 Document #: LTRT-85609
Mediant 600
3.1.4 TRUNKS (E1/T1) Module
The device supports one or two digital PRI (E1/T1/J1) trunk spans, including fractional
E1/T1.
3.1.4.1 Port Description
The module is available in 1 or 2 span configurations, providing RJ-48c ports. The ports are
labeled I and II.
Figure 3-5: TRUNKS Module
3.1.4.2 LED Description
Each trunk port provides a LED for indicating operating status, as described in the table
below:
Table 3-5: E1/T1 PRI TRUNKS Module LED Description
Color State Description
Green
On Trunk is synchronized (normal operation).
Red
On Loss due to any of the following signals:
LOS - Loss of Signal
LOF - Loss of Frame
AIS - Alarm Indication Signal (the Blue Alarm)
RAI - Remote Alarm Indication (the Yellow Alarm)
- Off Failure / disruption in the AC power supply or the power is
currently not being supplied to the device through the AC
power supply entry.

Table of Contents

Other manuals for AudioCodes Mediant 600

Related product manuals