AudioCodes Mediant Series - Page 9

Quick Setup Guide 2. Installing the Hardware
BroadCloud SIP Trunk 9 AudioCodes Mediant BRI/PRI Gateway
Figure 2-7: Cabling to Power using Power Adapter
3. Plug the power adapter directly into a standard electrical wall outlet.
2.1.4 Powering the Device On / Off
The power switch is located on its rear panel (see Section 2.1.2).
 To power on the device:

Press in the power button; the device receives power, indicated by the lighting of the
Power LED on the front panel.
 To power off the device:

Press out the power button; the device powers off, indicated by the Power LED going
off.