AudioCodes MediaPack MP-112 Fast Track Guide

Analog Fast Track Guide 1. Quick Start
Version 4.8 7 March 2006
1 Quick Start
This guide provides you with information on how to install the MediaPack for the first time. Prior
knowledge of IP networks is preferred.
Refer to the configuration procedures, outlined in Figure 1-1, for information on how to install,
initialize, configure the device and make calls. For detailed information on how to fully configure
the gateway refer to the MediaPack User’s Manuals.
Figure 1-1: Required Steps to Install the MediaPack

AudioCodes MediaPack MP-112 Specifications

General

Fax Support	T.38, G.711 pass-through
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Ports	2 FXS
Network Interface	10/100Base-T Ethernet
Protocols	SIP, MGCP
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Management	Web, SNMP
Power Supply	12V DC