audioengine A5+ setup guide
Other Features
10
Variable Output
The A5+ includes a variable preamp audio output so you can connect
a subwoofer, other Audioengine powered speakers, or an Audioen-
gine wireless adapter to daisy-chain music to other systems around
the house. This output is variable (adjustable) so the volume level
can be controlled from the A5+ front panel or remote control.
USB Power
The USB port allows you to power and charge your iDevice (iPod,
iPhone, iPad, etc.), Audioengine wireless adapters, or any USB-
powered product through the USB connector on the rear panel.
Note that this is for power only, not USB audio or data transfer.
Stand Mounting
Threaded 1/4"-20 brass inserts are included on the bottom of each
speaker cabinet to provide the ability to attach the speakers to free-
standing oor stands. These inserts, however, are not designed to
support the full weight of the speakers and therefore should not be
used with single-point wall or ceiling mounts.
Important Safety Note: It is the customer’s responsibility to check
with the stand manufacturer to determine whether that specic
stand is capable of handling the weight and proportions of these
speakers in a safe and stable manner. The customer is also respon-
sible for proper selection of mounting hardware not included with
the speaker and for proper assembly. Audioengine disclaims any
liability for the selection of suitable oor stands and/or correct hard-
ware between the selected stand and these speakers.
For a complete list of product features and specications, go to:
www.audioengineusa.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
