AudioEngine A5+

audioengine A5+ setup guide
13
Audioengine 5+ Premium Powered Speakers
General Specications
Power Consumption
Idle, Mute, Sleep:
8t8t4W
10.75” (27 cm) x 7” (18 cm) x 7.75” (20 cm) each
15.4 lbs (7 kg)
MCTLH
31 lbs (14 kg)
11.5” (W) x 14.5” (H) x 21.75” (L)
Dimensions (HWD):
Weight (Left):
Weight (Right):
Shipping weight:
Shipping box dims:
Environmental
Requirements:
tOperating temperature: 32° to 88°F (0° to 31°C)
t
Non-operating temperature: -4° to 113°F (-20° to 45°C)
tRelative humidity: 5% to 95% non-condensing
2.0 powered (active) speaker system
150W peak power total
(50W RMS, 75W peak per channel), AES
Dual Class AB monolithic
5" Kevlar woofers, 20mm silk dome tweeters
3.5mm stereo mini-jack, RCA L/R
RCA L/R audio (full-range, adjustable)
USB Type A (power/charge)
7)[NBOVBMMZTXJUDIBCMF
>95dB (typical A-weighted)
<0.05% at all power settings
<50db
50Hz-22kHz ±1.5dB
10K ohms unbalanced
Output current limiting, thermal over-temperature,
power on/o transient protection, replaceable
external main fuse
Power output:
Amplier type:
Drivers:
Type:
Inputs:
Outputs:
Voltages:
Signal-to-noise:
THD:
Crosstalk:
Frequency response:
Input impedance:
Protection: