Audiolab 7000CDT User Manual

7: Menu Options
Display Option
Access the various display options for the
7000CDT front panel display.
Trigger
Activate or deactivate the 12V
trigger function of the 7000CDT.
Animation
Activate (ON) or deactivate (OFF) the
animations shown in the playback
interface display.
Page 9
Brightness
Adjust the brightness of the 7000CDT front
panel display.
Auto Source Select
This option enables or disables the 7000CDT's
automatic detection of a CD or USB device
when in playback mode.
With auto input select 'ON’ the 7000CDT will
offer the user the immediate option to
change input source, when a CD or USB
device is detected. If the option is not
activated within 5 seconds, the device will
continue to play as normal from a current
source.
Display Time Out
Adjust the time period after which
the 7000CDT display will revert to
your pre-chosen display option, after
performing track selection and other
operations.
< Display Settings
Brightness
8 10
< Display Settings
Time Out
5s
10s
15s
30s
< Display Options
Home
Audiolab
Display Off
< Display Settings
Animation
Off
On
< Trigger
Off
On
< Auto Source Select
Off
On
System Operations
Specifications
Playing Operations
Important
Safety Information
Contents Getting Started Controls and Functions
Remote Handset
Warranty Coverage
Connections Menu Options

Audiolab 7000CDT Specifications

General

Category	CD Transport
Total Harmonic Distortion	<0.002%
Standby Power Consumption	<0.5W
Power Consumption	15W
Disc Compatibility	CD, CD-R, CD-RW
Digital Outputs	Coaxial, Optical
Output Impedance	75Ω
Digital Output Cable	Coaxial