33
8.3.5 AutoOff
Turn the volume controller on the front panel clockwise to activate the automatic
power off function 'AutoOff'. Turn the volume controller anti-clockwise to disa-
ble the AutoOff function.
disabled
The AutoOff function is disabled. You have to use the key on
the front panel or the WATT key on the Audionet Metal Remote
Control to power the WATT down to Stand-By mode.
active
The AutoOff function is active. After 20 minutes of inactivity, i.e.
no control command was issued nor any audio signal was detected
at the currently selected input channel during this period, the
WATT will automatically power down to Stand-By mode to re-
duce energy consumption.
8.3.6 By-Pass Channel
Use the volume controller on the front panel to select the input channel you
would like to use for the By-Pass mode.
To Next Page