35
Important
• Please do first completely read this section on the special By-Pass mode func-
tion, before you start using it in order to prevent incorrect usage and possible
damage to your audio system and/or hearing.
• No input channel is selected for the By-Pass mode as factory default. Use the
menu item to select the desired input channel for the By-Pass mode.
The volume control of the WATT is by-passed as long as the By-Pass mode is
active. The WATT passes the input signal to the outputs and amplifiers at its full
level.
The special By-Pass mode function of your WATT is activated automatically as
soon as you switch to the input channel dedicated to By-Pass mode in the setup
menu item
By-Pass Channel
. The signal at the input channel selected for By-
Pass mode operations is passed through to the amplifiers and outputs of your
WATT at the level of 0 dB (i.e. no change in volume level).
The special By-Pass mode function is switched off automatically as soon as you
select a different input channel. The volume is therefore reset to its prior level.
Important
• Please check the correct connection and setup before you use the By-Pass
mode for the first time. The input signal is passed through to the outputs and
amplifiers at full level!
As soon as the By-Pass mode is activated, the WATT will ignore all control com-
mands coming from the keys on the front panel or the remote control (excep-
tions see below!).
To Next Page