- Rotate 270°
- Rotate 90°
- Rotate 180°
- Rotate 360°
1) During playback, press the ZOOM button to enlarge or minimize the image by the following order:
100%, 125%, 150%, 200%, 75%, 50%
2) To resume normal viewing, press the ZOOM button again until the picture returns to its normal state.
Press the OSD button to show the file information. Press again to show the picture number.
1) There are 3 modes that you can select when rotating a picture: "Invert", "Left" and "Right". These operations
are only allowed when a picture is
is displayed. The arrow navigation keys are used to select the different rotation modes:
displayed normally and will be cancelled automatically when a new picture
1) Press the REPEAT button repeatedly to play a single photo. You can choose to repeat "Single", "Repeat One",
"Repeat Folder".
When a JPEG (Image) disc is inserted into the DVD player,the slideshow will automatically start. Press the STOP
button to enter the naivgation menu.
- In the menu, use the UP or DOWN navigation buttons to select a file, then press the PLAY/PAUSE button to start
the slide show. Press the PREV or NEXT buttons during the slide show to return to the previous picture or skip to
the next picture. Press the PLAY/PAUSE button during the slide show to pause the current picture. Then press
the PLAY/PAUSE button to resume the slide show.
Press the PROG button repeatedly to change the picture in different slide types.
PROGRAM
IMAGE ROTATION
REPEAT
ZOOM
(On Screen Display)
OSD
OPERATIONS-- DISC PLAYBACK
JPG
14
To Next Page
Loading...
