AudioSource AMP100 - User Manual

OWNER’S MANUAL
AMP 100
AudioSource®
9200 North Decatur St.
Portland, OR 97203
503.286.9300
ww
w.audiosource.net
AMP 100 Owner
’s Manual
Congratulations on your purchase of the AudioSource® AMP 100.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.800.950.1449 or 503.286.9300.
Please read your warranty and retain your receipt and original carton
for possible future use.
For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net
AMP 100
Home Audio Multi-Zone Stereo Power Amplifier
FEATURES:
Line 1 / Line 2 priority input switching
Line 2 auxiliary output
Speaker A/B switching
Front panel Balance and Volume controls
Signal sensing “Power On”
SPECIFICATIONS
Stereo (8 ohm): 50W per channel, 20Hz ~ 20kHz, <1% THD+N
60W per channel, 1kHz, <1% THD+N
Stereo (4 ohm): 60W per channel, 20Hz ~ 20kHz, <1% THD+N
75W per channel, 1kHz, <1% THD+N
Bridged Mono (8 ohm): 160W, 1kHz, <1% THD+N
Frequency Response: 10Hz ~ 30kHz, +0dB/ -3dB
Signal to Noise Ratio: 100dBA below 50W output into 8 ohms
Channel Separation: 65dB @ 1kHz, referred to 50W output
into 8 ohms
Input Sensitivity: 900mV input for rated 50W output
into 8 ohms
AC Power Consumption: 500W maximum
Net Weight: 9.6lbs / 4.4kgs
Gross Weight: 10.8lbs / 4.9kgs
2.9”
(74mm)
16.5” (419mm)
9.5”
(242mm)
Left
Right
Balance
Volume
SPEAKERS
A B
AMP 100
STEREO POWER AMPLIFIER
Min
Max
POWER

Summary

Product Overview and Specifications

Product Features

Highlights key functionalities like input switching, speaker selection, and front panel controls.

Technical Specifications

Details power output, frequency response, signal-to-noise ratio, and impedance ratings for the amplifier.

Important Safety Instructions

Safety Symbols Explanation

Explains the meaning of safety symbols like exclamation points and lightning flashes.

General Safety Guidelines

Provides critical warnings and instructions for safe operation and maintenance.

Magnetic Field Caution

Warns about the amplifier's magnetic field and advises on equipment placement.

Controls and Connections

Front Panel Controls

Details the function of the power switch, speaker selector, balance, and volume controls.

Rear Panel Controls and Terminals

Explains Line inputs, speaker outputs, mode switch, auto-on, and AC terminal.

Setup and Applications

Stereo Setup Configuration

Guides on connecting speakers and sources for standard stereo operation.

Multi-Source Setup

Describes how to integrate the amplifier into a multi-zone or distributed audio system.

Limited Warranty Information

Outlines the terms and conditions of the manufacturer's product warranty.

AudioSource AMP100 Specifications

General

Brand	AudioSource
Model	AMP100
Category	Amplifier
Language	English