Need help?Do you have a question about the Audiotec Fischer MATCH UP 10DSP and is the answer not in the manual?
General| Number of Channels | 10 |
|---|---|
| Amplifier Class | Class D |
| DSP | Yes |
| DSP Resolution | 64 Bit |
| DSP Power | 295 MHz |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 100 |
| Idle Current | 1.5 A |
| Fuse | 2 x 25 A |
| Crossover | yes |
| Frequency Response | 10 Hz - 22 kHz |
| THD+N | <0.05% |
| Operating Voltage | 10.5 - 16 Volts |
| Outputs | 10 x RCA |
| Power Output | 65 Watts RMS x 8 + 130 Watts RMS x 2 |
| Total Harmonic Distortion | <0.05% |
To Next Page