Audiovox DV 1680 User Manual

8. External Connection
You can connect the DVD Player to any audiovisual
equipment from the DVD Player's output terminals of
DVD Player. You can also connect any audiovisual
equipment to the DVD Player's input terminals.
To switch the DVD Player's signal source between
input and output, adjust the Input/Output switch(IN
OUT).
Set the switch to the OUT position, to transmit signals
from the DVD Player to other equipment.
Set the switch to the IN position for the DVD Player to
receive signals from other equipment.
When the signal source of the DVD Player is in the IN
position, the LCD on the front panel will not illuminate
when no external signal is coming in.
8.1 A/V Out
When the A/V IN/OUT switch is in the OUT position,
A/V signals will come out from the 3-in-1 A/V cable
during playback. Use the DVD Player's AV cable to
transmit signal to the following components:
1. TV with A/V IN terminals
2. VCR/Video Cassette DVD player
3. V8 or VHS video cameras
4. Projector
8
Attention! Please set the IN/OUT switch at
OUT position for default setting, otherwise
no sound/screen will be heard/seen on the
player during playback.
Note:
Copy Guard Protection:
When the DVD player audio/video output is plugged into
the A/V input jacks of a Video Cassette Recorder (VCR)
using the audio/video cables, (red, white and yellow RCA
jacks) poor picture quality may result (i.e. screen on TV
getting brighter and dimmer) due to Macrovision copy
guard protection contained on some DVD discs.
36

Audiovox DV 1680 Specifications

Power

power adapter voltage	12 V
power adapter current	2 A
playing time with battery	3.5 hours

Display

display size	6.8 inches
display type	TFT-LCD
display resolution	384 x 234

Weight and Dimensions

weight without battery pack	1 kg
width	168.3 mm
depth	172 mm
height	35 mm