Audiovox PVS69701 - Customizing the Function Settings; LANGUAGE Setup; VIDEO Setup; SYSTEM Setup

GB - 19
LANGUAGE SETUP
1. Press the SETUP button in stop mode.
2. Use button to change the highlight cursor. Use or button to select a
language, then press the ENTER button. The screen will change to your selected
language immediately.
3. To exit the SETUP MENU and return to the normal screen, press the RETURN
or SETUP button.
VIDEO SETUP
1. Press the SETUP button in stop mode.
2. Use
button to select LANGUAGE SETUP, then press or button repeatedly
until VIDEO SETUP appears.
3. Use or button to select the option (BRIGHTNESS or CONTRAST), then
press the button. Use the or button to make adjustments, then press the
ENTER button. (The screen will change to your selected setting).
4. Repeat steps 2 and 3 above to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the RETURN
or SETUP button.
TV Type
Pan Scan
• When wide-screen video is played, this mode clips the right and left sides of
the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letter box mode (black bands top and bottom).
Letter Box
• When wide-screen video is played in this mode on a conventional screen,
black bands appear at the top and bottom of the screen.
Wide Screen
• This is the correct mode for playing wide-screen videos on a wide-screen.
NOTE:
• The displayable picture size is preset on the DVD disc. Therefore the playback
picture of some DVD discs may not conform to the picture size you select.
• When you play DVD discs recorded in the 4:3 aspect ratio, the playback
picture will always appears in the 4:3 aspect ratio regardless of the TV TYPE
setting.
CUSTOMIZING THE FUNCTION SETTINGS
WIDE SCREEN
LETTER BOX
Cut off when a wide-screen
video image is played.
PAN SCAN
SYSTEM SETUP
1. Press the SETUP button in stop mode.
2. Use
button to select LANGUAGE SETUP, then press or button repeatedly
until SYSTEM SETUP appears.
3. Use or button to select the option (TV TYPE, PASSWORD, RATING or
DEFAULT), then press the button. Use or button to make adjustments,
then press the ENTER button. (The screen will change to your selected setting).
4. Repeat steps 2 and 3 above to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the RETURN
or SETUP button.
(continued on next page)