SOUND ADJUSTMENTS
Adjusting the Volume
To adjust volume, rotate the volume knob on the front panel.
Mute
During playback, press the VOLUME knob on the panel or [ ] on the screen (if available), the
sound will mute. To resume sound, press the button again.
Selecting Equalizers Presets
1. Touch [ ] on the screen. The current Equalizer setting is
displayed.
2. You can select one of the following preset equalizers:
∙ [User] ∙ [Jazz]
∙ [Techno] ∙ [Optimal]
∙ [Rock] ∙ [Pop]
∙ [Classic] ∙ [Flat]
3. Touch [ Reset ] to restore the above settings into default settings.
4. Touch [ ] to exit.
Adjusting FAD BAL
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
larruping listening effect according to the surroundings and your
interest.
1. To enter the EQ setup mode:
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjusting subwoofer volume
Touch [ ] / [ ] or drag [ ] to adjust the subwoofer volume
from -12 to +12.
3. Adjusting fader/balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value from
-20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
47
To Next Page
Loading...
