Heating power: General according to the environment temperature and print material to adjust
it.
Temperature control: Keep acquiesce. It is better not more than 2%.
Walking speed: The numeric is smaller and the speed of the print is faster, but the printing
speed too fast will appear data loss phenomenon, generally not less than "15".
Number of replications: Set the same content of the layout of printed times and not be less
than 1.
Hollow out print: Keep acquiesce. (330 type machine temporary don't support this function)
Document name: Please name file name of your set layout.
Instructions: Heating power of the numerical value of ribbon to printing media and the
bonding strength, the better the more uniform printing effect. But numeric too large will cause
burning broken ribbon and print media, especially will blow out the print head.
To Next Page
Loading...
General