August DA701C - Preset; Clock

-21-
I
0
0
SYSTEM
AUTO
SOUND SYS-
SWAP
COPY
COLOR SYS-
/ Select / Adjust
PRESET
VHFL
0
ON
AUTO SEARCH-
SEARCH
FINE TUNE
BAND
POSITION
SKIP
//Select Adjust
Color-Sys: Press LEFT or RIGHT to select between AUTO, PAL, and SECAM.
Sound-Sys : Press LEFT or RIGHT to select between I, L, BG, and DK.
UK customer please set the sound system to I.
Swap: Use LEFT, RIGHT, UP or DOWN to swap channel positions.
Copy: Use LEFT, RIGHT, UP or DOWN to copy and change channels.
11.5. Preset
Press UP or DOWN to select between Auto Search, Search, Fine Tune, Band,
Position and Skip settings.
Press LEFT or RIGHT to change the setting.
//Select Adjust
TIME
OFF TIME-
ON TIME-
SLEEP
CLOCK
:
:
:
0
11.6. Clock
Press UP or DOWN to select between Sleep, Time, Off-Time, and On-Time
settings.
TIME
OFF TIME-
ON TIME-
SLEEP
CLOCK
:
:
:
0
Sleep: The unit can be set to turn off automatically after certain time, press
LEFT or RIGHT to select from 0 to up to 240 minutes maximum with 10
minutes intervals.
Adjust hour Adjust minute Select items to be setup:: /:
-22-
Time: Press LEFT to change the hours, press RIGHT to change the minutes.
Off-Time: The unit can be set to turn off automatically, press LEFT to change
the hours, press RIGHT to change the minutes.
On-Time: The unit can be set to turn on automatically, press LEFT to change
the hours, press RIGHT to change the minutes.
1. Auto Search Start from Program No .0.
2. When the signal is received under Manual Search, the indication
frequency will stop, which is the optimum position for signal storage.
If the signal is too weak, the system will automatically identify it as no
signal.
3. In the case of a picture without sound, please check the Sound System
for correct setup first.
4. If the input signal is not strong enough, please adjust “Fine” option, it
may improve the picture and sound quality.
If the signal is too weak, the image will remain poor whatever you do, and
may output loud noises, shaking images and inferior sound etc., which is
not the TV's fault. If the image remains poor when using the telescopic
antenna, please try to use a roof top aerial or an amplified external antenna.