AUMA LE Series - 2. Identification; 2.1. Name plate

2. Identification
2.1. Name plate
Figure1: Arrangement of name plates
[1] Linear thrust unit name plate
[2] Additional plate, e.g. KKS (Power Plant Classification System) plate or approval
plate
Description of linear thrust unit name plate
Figure2: Linear thrust unit name plate (example)
[1] Name of manufacturer
[2] Address of manufacturer
[3] Type and size (see explanation below)
[4] Commission number (see explanation below)
[5] Serial number (works number)
[6] Stem (see explanation below)
[7] Thrust (for modulating duty/open-close duty)
[8] Stroke
[9] Lubricant
[10] Enclosure protection
[11] Ambient temperature
[12] Explosion-proof version (option)
[13] Customer information (option)
6
LE 12.1 – LE 200.1
Identification