AUMA MATIC AM 02.1 - Page 3

225.3. Accessories for electrical connection
225.3.1. Controls mounted to wall bracket
235.3.2. Parking frame
235.3.3. Protection cover
245.3.4. Double sealed intermediate frame
245.3.5. Earth connection, external
256. Operation................................................................................................................................
256.1. Manual operation
256.1.1. Manual operation: engage
256.1.2. Manual operation: disengage
256.2. Motor operation
256.2.1. Local operation
266.2.2. Actuator operation from remote
287. Indications..............................................................................................................................
287.1. Indication lights
287.2. Mechanical position indicator/running indication
308. Signals.....................................................................................................................................
308.1. Feedback signals via output contacts (binary)
308.2. Feedback signals (analogue)
319. Commissioning (basic settings)...........................................................................................
319.1. Heat-up time for low temperature version
319.2. Switch compartment: open
329.3. Torque switching: set
339.4. Limit switching: set
339.4.1. End position CLOSED (black section): set
339.4.2. End position OPEN (white section): set
349.5. Intermediate positions: set
349.5.1. Running direction CLOSE (black section): set
359.5.2. Running direction OPEN (white section): set
359.6. Test run
359.6.1. Direction of rotation: check
369.6.2. Limit switching: check
379.6.3. PTC tripping device (option): test
379.7. Electronic position transmitter EWG 01.1
389.7.1. Measuring range: set
399.7.2. Current values: adjust
399.7.3. LED end position signalling: switch on/off
399.8. Potentiometer
409.8.1. Potentiometer setting
409.9. Electronic position transmitter RWG
419.9.1. Measuring range: set
419.10. Mechanical position indicator: set
429.11. Switch compartment: close
4310. Commissioning – controls settings.....................................................................................
4310.1. Controls: open
4310.2. Type of seating: set
4410.3. Push-to-run operation or self-retaining: set
4510.4. Running indication (blinker transmitter): activate/deactivate
3
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
AM 01.1/AM 02.1 Table of contents