AUMA SA 07.6 User Manual

Control
Parallel
Profibus DP
Profinet
Modbus RTU
Modbus TCP/IP
→ EtherNet/IP
Foundation Fieldbus
HART
Multi-turn actuators
SA 07.2 – SA 16.2
SAR 07.2 – SAR 16.2
Control unit: electronic (MWG)
with actuator controls
AC 01.2 Non-Intrusive
Assembly and commissioningOperation instructions

AUMA SA 07.6 Specifications

General

Brand	AUMA
Model	SA 07.6
Category	Controller
Language	English

Summary

1. Safety Instructions

1.1. Safe Handling Prerequisites

Essential conditions for safe operation and product handling.

2. Identification

2.1. Name Plate Information

Details found on the actuator and control unit name plates for identification.

2.2. Short Description of Actuators

4. Assembly

4.1. Mounting Position

Specifies permissible actuator mounting orientations.

4.2. Valve Attachments and Drive Types

Details valve interface options and output drive configurations (A, B, E).

4.4. Actuator Mounting to Valve/Gearbox

Procedures for attaching the actuator to various valve or gearbox types.

5. Electrical Connection

5.1. Basic Electrical Connection Information

General safety and connection principles for electrical setup.

5.3. SJ Electrical Connection Details

Detailed steps for connecting via the SJ plug/socket system.

5.4. SF Compact Electrical Connection

Specifics for the SF compact version connection with EtherNet/IP.

7. Indications

7.2. Display Indications and Status Messages

Understanding various feedback, status, and warning messages on the display.

9. Commissioning (Basic Settings)

9.1. Type of Seating Configuration

Configuration of valve seating type (limit or torque).

9.2. Torque Switching Settings

Setting torque limits for valve protection.

9.3. Limit Switching Configuration

Configuring end position limit switches for valve travel.

9.5. EtherNet/IP Module Configuration

Steps for configuring the EtherNet/IP module using utility software.

9.6. Test Run Procedures

12. Servicing and Maintenance

12.1. Preventive Maintenance Measures

13. Technical Data

13.1. Multi-Turn Actuator Specifications

Comprehensive specifications for the multi-turn actuators.

13.2. Actuator Control Unit Specifications

Comprehensive specifications for the actuator control units.