AUMA MATIC AM 02.1 - Page 4

4510.5. Torque fault in collective fault signal: activate/deactivate
4510.6. Positioner
4610.6.1. Input ranges (signal type) for setpoint and actual value
4610.6.2. Behaviour on loss of signal (actuator reaction)
4810.6.3. Adjustment in end positions
4910.6.4. Sensitivity setting
5010.7. EMERGENCY command (EMERGENCY - OPEN/EMERGENCY - CLOSE)
5110.8. Controls: close
5211. Corrective action....................................................................................................................
5211.1. Faults during commissioning
5311.2. Fuses
5311.2.1. Fuses within the actuator controls
5411.2.2. Motor protection (thermal monitoring)
5512. Servicing and maintenance...................................................................................................
5512.1. Preventive measures for servicing and safe operation
5512.2. Maintenance
5612.3. Disposal and recycling
5713. Technical data.........................................................................................................................
5713.1. Technical data Multi-turn actuators
6013.2. Technical data Actuator controls
6314. Spare parts.............................................................................................................................
6314.1. Multi-turn actuators SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
6514.2. Actuator controls AUMA MATIC AM 01.1/AM 02.1
6715. Certificates..............................................................................................................................
6715.1. Declaration of Incorporation and EC Declaration of Conformity
68Index........................................................................................................................................
70Addresses...............................................................................................................................
4
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2
Table of contents AM 01.1/AM 02.1