To Next PageTo Next Page
Need help?Do you have a question about the AUMA SA 14.2 and is the answer not in the manual?
General| Type of actuator | Multi-turn |
|---|---|
| Type of control | Electric |
| Output speed | 4 to 180 rpm |
| Communication | Profibus, Modbus |
| Protection class | IP65 |
Details on the electronic control unit (MWG) for actuators.
Specifies the non-intrusive control unit version AC 01.2.
Overview of available control interfaces and protocols for actuators.
Essential prerequisites for safe product handling and operation.
Defines the intended applications and permitted uses of the actuators.
Specific requirements for applications in Ex zone 22 hazardous locations.
Information on identifying the actuator via its name plate details.
Provides a brief overview of the actuator's functionality and components.
Guidelines and safety instructions for the safe transport of actuators.
Information on permissible mounting positions for the actuator.
Overview of different output drive types for valve attachment.
Detailed description of the design for output drive type A.
Fundamental information and safety precautions for electrical connections.
Provides an overview of different electrical connection types available.
Instructions for operating the actuator using the handwheel.
Procedures for operating the actuator via its electric motor.
Information on indications displayed during the commissioning process.
Overview of different indications shown in the actuator's display.
How status signals are transmitted via digital output contacts.
Information on analogue signals and outputs for valve position and torque.
Procedure for setting the actuator's seating type (limit or torque).
Instructions for setting the torque switching limits for valve protection.
Procedures for opening and closing the actuator switch compartment.
Description of the self-adjusting mechanical position indicator.
Troubleshooting common faults encountered during commissioning.
Explanation of fault and warning indications displayed by the actuator.
Preventive actions for ensuring safe operation and maintenance.
General maintenance procedures for actuators.
Detailed technical specifications for multi-turn actuators.
Detailed technical specifications for actuator controls.
Overview of spare parts for multi-turn actuators.
Exploded view and part numbers for AC 01.2 controls with SJ connection.
Exploded view and part numbers for AC 01.2 controls SF compact.
Details of the Declaration of Incorporation and EU Declaration of Conformity.
