Need help?Do you have a question about the AUMA SA 14.1 and is the answer not in the manual?
General| Brand | AUMA |
|---|---|
| Model | SA 14.1 |
| Category | Controller |
| Language | English |
Core safety principles, user responsibilities, and compliance with standards.
Explanation of signal words (DANGER, WARNING, CAUTION) and document symbols.
Procedures for mounting the actuator to valves or gearboxes.
General safety warnings and prerequisites for electrical connections.
Instructions for connecting the actuator via plug/socket connectors.
Procedures for engaging and disengaging manual operation.
How to operate the actuator using local push buttons.
How to control the actuator remotely via fieldbus.
Detailed breakdown of status indications related to operation modes.
Configuring Modbus communication parameters like baud rate and parity.
Step-by-step guide to set the CLOSED end position.
Step-by-step guide to set the OPEN end position.
Performing a test run after initial settings.
Troubleshooting common faults encountered during initial setup.
Understanding and responding to fault and warning messages.
How faults and warnings are displayed in status indication S0.
Specific fault indications displayed in status indication S1.
Regular checks and maintenance tasks for safe operation.
To Next Page
