EasyManua.ls Logo

AUMA TIGRON TR-M30X - User Manual

AUMA TIGRON TR-M30X
132 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Multi-turn actuators
TIGRON
TR-M30X – TR-M1000X
Operation and settingManual

Table of Contents

Other manuals for AUMA TIGRON TR-M30X

Preview: Operation Instructions
Operation Instructions76 pages
Preview: Short Instructions
Short Instructions10 pages

Questions and Answers

  • B
    Bradley SmithAug 12, 2025
    Why is there no communication between slave and master in my AUMA TIGRON TR-M30X Controller?
    • H
      hessjulieAug 12, 2025
      If the AUMA Controller isn't communicating between slave and master, it might be due to incorrect parameter data. To resolve this, correct the parameter data in the master. Alternatively, the parameters might not have been sent yet, so ensure you send them. Also, verify the GSD file is correct. Finally, check the cable connection to ensure it's not interrupted and the polarity is correct.
  • A
    Andrew BrownAug 19, 2025
    What to do if there is no communication between slave and master in AUMA Controller?
    • J
      James HintonAug 19, 2025
      If the AUMA Controller isn't communicating between slave and master, it might be due to incorrect configuration data. Correct the configuration in the master. Ensure that you send configuration data.
  • T
    Tiffany HarveyAug 27, 2025
    What to do if AUMA Controller slave is in the fail safe state?
    • K
      Kyle WallaceAug 27, 2025
      If the AUMA Controller slave is in a fail-safe state, check all other implemented slaves at the Profibus. If necessary, deactivate the Autoclear function in the master. You may also need to send a GC OPERATE telegram.
  • H
    Heather BoothSep 3, 2025
    What to do if master does not send an operation command to AUMA TIGRON TR-M30X Controller?
    • R
      Rose WalkerSep 3, 2025
      If the master isn't sending an operation command to the AUMA Controller, check the program of controls.

AUMA TIGRON TR-M30X Specifications

General IconGeneral
Protection classIP68
TypeTR-M30X
Operating temperature-30 °C ... +70 °C
Ambient Temperature-30 °C ... +70 °C
Housing MaterialAluminium
Voltage24 V DC

Related product manuals