AUMA TIGRON TR-M30X - Table of Contents; Configuration of Analogue Output 1; Signal Range of Analogue Output 1; Adjustment of Analogue Output 1

Read operation instructions first.
●
Observe safety instructions.
Purpose of the document:
This document contains information for the commissioning, operation and maintenance staff. It is intended to
support local device operation and setting modifications.
Table of contents Page
71. Safety instructions.................................................................................................................
71.1. Prerequisites for the safe handling of the product
81.2. Range of application
81.3. Warnings and notes
81.4. References and symbols
102. Short description...................................................................................................................
123. Operation................................................................................................................................
123.1. Menu navigation
123.1.1. Combi-Switch operation elements
133.1.2. Control panels magnetic pen operation
133.1.3. Device menu and status indications
143.1.3.1. Open device menu (Combi-Switch version)
143.1.3.2. Exit device menu / show status indications (Combi-Switch version)
153.1.3.3. Open device menu (magnetic pen control panel version)
163.1.3.4. Exit device menu / show status indications(magnet pen-control panel version)
163.1.3.5. Directly open menu page by entering the ID
173.1.4. User, user level, password
173.1.4.1. Change user level
183.1.4.2. Change passwords
193.1.4.3. Timeout for incorrect password entry (security)
193.1.5. Language change in the display
214. Indications..............................................................................................................................
214.1. Indications and symbols in the display
224.1.1. Feedback signals from actuator and valve
244.1.2. Status indications according to AUMA classification
244.1.3. Status indications according to NAMUR recommendation
254.2. Indication lights of local controls
275. Output signals........................................................................................................................
275.1. Signals via Profibus DP
275.2. Signals via Modbus RTU
275.3. Status signals via output contacts (digital outputs)
275.3.1. Configuration of outputs
275.3.2. Output coding
285.4. Configurable status signals
285.5. Analogue signals (analogue outputs)
285.5.1. Configuration of analogue output 1
295.5.2. Signal range of analogue output 1
305.5.3. Adjustment of analogue output 1
305.5.4. Configuration of analogue output 2
305.5.5. Signal range of analogue output 2
2
Multi-turn actuators
Table of contents TR-M30X – TR-M1000X