To Next PageTo Next Page
Need help?Do you have a question about the AUMA SAEx Series and is the answer not in the manual?
General| Explosion protection | ATEX, IECEx |
|---|---|
| Ingress protection | IP66 / IP68 |
| Communication interfaces | Modbus, Foundation Fieldbus |
| Display | LCD |
| Control Signal | 4-20 mA |
| Type of controller | Electric actuator controller |
Explains different warning symbols (DANGER, WARNING, CAUTION, NOTICE).
Details about the actuator name plate and its components.
Instructions for safe transport, including hovering load warnings.
General safety guidelines and basic information for electrical connections.
Procedures for manual handwheel operation.
Interpreting valve position, torque, and operation command signals.
Fault, warning, and status indications per AUMA and NAMUR standards.
Procedures for setting valve seating type and torque switching limits.
Setting limit switches and verifying rotation direction and limits.
Troubleshooting commissioning faults, interpreting indications.
Procedures for replacing fuses and troubleshooting motor protection.
Detailed technical data for multi-turn actuators.
