AUMA SAExC 10.1 User Manual

Electric multi-turn actuators
Operation instructions
SAExC 07.1 – SAExC 16.1
SARExC 07.1 – SARExC 16.1
with actuator controls
AUMA MATIC AMExC 01.1
for group I, category M2

AUMA SAExC 10.1 Specifications

General

Brand	AUMA
Model	SAExC 10.1
Category	Controller
Language	English

Summary

Safety Instructions

Electrical Connection Safety

Warnings and Notes

Highlights the need to observe warnings to prevent injury or damage, explaining pictographs.

Setting the Limit Switching

Setting End Position CLOSED

Details the procedure for setting the CLOSED end position using spindle A.

Setting End Position OPEN

Details the procedure for setting the OPEN end position using spindle D.

Checking Limit Switches

Setting the Torque Switching

Torque Switching Setting

Details how to set torque limits, emphasizing valve manufacturer consent.

Checking Torque Switches

Test Run Procedures

Checking Direction of Rotation

Provides steps to verify correct output drive rotation direction.

Checking Limit Switch Settings

Checking PTC Tripping Device

Details how to test the PTC tripping device and interpret fault signals.

Setting the Electronic Position Transmitter RWG (Option)

Setting 2-Wire System 4-20 mA and 3-/4-Wire System 0-20 mA

Details setting the RWG for 2-wire or 3-/4-wire systems with specific current outputs.

Setting 3-/4-Wire System 4-20 mA

Details setting the RWG for 3-/4-wire systems with 4-20 mA output.

Electronic Positioner (Option)

Positioner Adjustment for Closed End Position

Provides steps for adjusting the positioner for the CLOSED end position.

Positioner Adjustment for Open End Position

Provides steps for adjusting the positioner for the OPEN end position.

Setting the Sensitivity

Fuses

Fuses within Actuator Controls

Motor Protection

Explains motor protection mechanisms (PTC, thermoswitches) and fault reset.

Maintenance Procedures

Regular Inspection and Maintenance

Outlines requirements for regular inspection by qualified personnel.

Visual Actuator Check

EXAM Certificates

EC Type Examination Certificate (EG-Baumusterprüfbescheinigung)

Details the EC type examination certificate for explosion protection.

Description of ATEX Certified Components

Key Parameters for ATEX Compliance

Declaration of Conformity and Incorporation

Declaration of Incorporation (Machinery Directive)

Declares conformity with Machinery Directive and lists applied standards.

EC Declaration of Conformity (ATEX, EMC, LVD)