To Next PageTo Next Page
Need help?Do you have a question about the AUMA SAEx 14.2 and is the answer not in the manual?
General| Type of actuator | Multi-turn actuator |
|---|---|
| Output speed | 4 to 180 rpm |
| Protection class | IP68 |
| Control | Local controls |
| Ambient temperature | -40°C to +60°C |
Ensuring compliance with all legal requirements, directives, and national regulations for assembly, connection, commissioning, and operation.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signals for safety-relevant procedures.
Defines a multi-turn actuator and describes AUMA's SAEx/SAREx series, including motor and handwheel operation.
Details the ACExC actuator controls, their mounting options, operation via local controls, and functions.
Describes the ATEX and IECEx approval plates, including classification and marking.
Provides instructions for safe transport of the actuator, including suspended load warnings and lifting points.
Provides steps for mounting the actuator to the valve, including output drive type considerations.
Details the mounting procedure for output drive type A, including stem nut machining.
Covers electrical connection safety, wiring diagrams, permissible networks, and voltage/frequency matching.
Details the KT/KM plug-in electrical connection with screw-type and spring clamp terminals.
Describes the KP/KPH plug-in electrical connection with screw-type terminals for power and control.
Covers operating the actuator via local controls and remote control.
Instructions for setting the type of seating (limit or torque) for end positions.
Guides on setting end positions (CLOSED/OPEN) and intermediate positions.
Lists faults encountered during commissioning and their causes/remedies.
Actions required for safe operation, including visual inspection and lubrication checks.
Covers features, duty types, motors, mains voltage, insulation class, and motor protection.
Details power supply, current consumption, switchgear, signals, and interfaces for actuator controls.
