To Next PageTo Next Page
Need help?Do you have a question about the AUMA SAEx 07.6 and is the answer not in the manual?
General| Brand | AUMA |
|---|---|
| Model | SAEx 07.6 |
| Category | Controller |
| Language | English |
Requirements for safe handling, including standards, personnel qualification, and specific conditions.
Defines where the actuators are designed for use, including zones and permitted/not permitted applications.
Explains safety-relevant symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Steps for mounting the actuator onto the valve.
General safety warnings and information regarding electrical connections and mains voltage.
Details on the KT/KM electrical connection types and their properties.
Details on the KP/KPH electrical connection types and their features.
Details on the KES electrical connection types and their technical data.
Procedures for operating the actuator manually for setup and emergency use.
Information on operating the actuator via its electric motor.
How valve position and operation direction are indicated on the display.
Explanation of status codes (S0005, S0006, S0007) for warnings, not ready, and faults.
Explanation of NAMUR status codes (S0008-S0011) for out of specification, function check, and maintenance.
How to set the type of seating (limit or torque) for end positions.
Procedures for setting the limit switches for end positions.
Performing test runs after settings are completed.
Commissioning of the EWG 01.1 electronic position transmitter.
Commissioning of the RWG electronic position transmitter.
How to set the measuring range for the RWG transmitter.
Troubleshooting common faults encountered during commissioning.
Explains how faults and warnings are displayed and their impact.
How motor protection functions and how to test it.
Routine checks and maintenance tasks for safe operation.
Detailed technical specifications for multi-turn actuators.
Detailed technical specifications for actuator controls.
