EasyManua.ls Logo

auna AMP-CD608 - User Manual

auna AMP-CD608
56 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.auna-multimedia.com
AMP-CD608
Verstärker mit DAB+ und BT
Amplifier with DAB+ and BT
Amplificador con DAB+ y BT
Amplificateur avec DAB+ et BT
Amplificatore con DAB+ e BT
10035298 10035299

Table of Contents

Questions and Answers

  • J
    Jessica ObrienAug 4, 2025
    Why is my auna AMP-CD608 remote control not working?
    • P
      psnyderAug 4, 2025
      Your auna Amplifier remote control might not be working due to several reasons: the battery might be empty (replace the battery), the battery might not be inserted correctly (insert the battery correctly), the remote control might be too far away from the unit (reduce the distance), there may be obstacles in the way (remove the obstacles), or you might have pressed the wrong key (use the correct button).
  • J
    Joseph MartinAug 10, 2025
    What to do if there is no sound from my auna AMP-CD608 Amplifier speakers?
    • P
      paul52Aug 10, 2025
      If the indicator is lit on your auna Amplifier but there is no sound, it could be that the speakers are not connected properly, so check the cable and connection of the speakers. Alternatively, the volume control might be set to minimum; in that case, use the volume control to increase the volume.
  • M
    Megan FergusonAug 17, 2025
    How to fix distorted stereo sound on auna AMP-CD608 Amplifier?
    • G
      garciajustinAug 17, 2025
      If the stereo sound from your auna Amplifier is distorted, with left and right channels reversed or the sound seeming distant, it's likely a polarity problem. Check that the speakers and input channels are properly connected, ensuring you connect (+) to (+) and (-) to (-).
  • M
    Monique ColeAug 23, 2025
    What to do if there is no sound from the center channel of my auna Amplifier?
    • K
      Katherine PriceAug 23, 2025
      If you're not getting any sound from the center channel of your auna Amplifier, it could be due to a disconnected speaker connection (check the cable and connection of the speakers), an interrupted cable connection of the input source (check the cable connection of the input source), or an incorrectly set balance control (check the balance control setting).
  • B
    Betty MillerAug 29, 2025
    Why is there no sound and the indicator is not lit on my auna Amplifier?
    • J
      Jessica OwensAug 29, 2025
      If the indicator is not lit and there's no sound from the speakers of your auna Amplifier, it's likely that the mains plug is not connected correctly. Check the cable and connection to resolve this.

Summary

Safety Instructions

Device Overview - Front Panel

Back Panel Connections

Remote Control

Connection Diagram

Operation

BT and DAB Modes

Troubleshooting

Disposal and Compliance

auna AMP-CD608 Specifications

General IconGeneral
Brandauna
ModelAMP-CD608
CategoryAmplifier
LanguageEnglish

Related product manuals