Aurora AU1285MD - Operation Details; Shredding Paper and Media; Operational Notes and Cautions

6 ENGLISH
OPERATION
CONTINUED NEXT PAGE

Paper/CreditCard/CDEntry:
 NOTE:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove paper clips
whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i nto the middle of the entry, releasing when
shredding begins. Never feed more than one credit card at a time.
• Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting
blades and internal components.
• Overheating with extended use: In the event that the shredder has shred continuously beyond the
maximum running time and overheating, the unit will automatically shut off. If this happens, switch the
shredder off for 45 minutes or longer before resuming normal operation.

Make sure you do not exceed sheet
count per pass (12 sheets max).
Insert paper as straight as pos-
sible into feed slot and release.

Insert one credit card at a time into
the middle of the feed slot.
Do not hold CD/DVD with finger through the
center ring while feeding into the shredder. Serious injury may
occur.
Never feed more than one credit card or CD/DVD at a time.
1) Hold the CD/DVD by the edge and feed one at a time, releasing
when shredding begins.
2) Shredder will stop when the entire disc has been destroyed.
!
Caution:

FeaturesaCD/DVDdestroyer: