28
Before mounting the
backplate support and the
windshield brackets, put
some EVA foam on the
indicated locations on the
headlight to protect it from
the windshield bolts.
Apply EVA at the exact
same positions on the other
side of the headlight.
Install both the backplate
support and the triangle
with the windshield brackets
on top of the tower.
Use the six supplied allen
bolts to secure them in
place.
Apply a bit of thread lock
and torque them according
to specications.
Thead lock: Loctite 243
or Permatex Blue
Torque value: 10Nm
13. BACKPLATE SUPPORT INSTALLATION
To Next Page
Loading...