T700 Rally kit installation manual. Aurora Rally Equipment PLC
web: aurora-rally.com, phone: +30 210 60 25 003
35
18. WINDSHIELD INSTALLATION
Install the side screens on
the bike by using the original
bolts (green circle).
Make sure that the rear part
of the screen is secured
on the hook inside the side
panel (red circle). Repeat the
procedure on the other side.
We recommend applying
EVA foam between the side
screens and the panels
(yellow area) to protect them
both from scratches.
Use the supplied bolts and
rubber spacers to install the
main part of the windshield.
Please note that you have
to put the rubber spacers
between the screen and the
brackets. The easiest way
to do this is to secure both
bolts on each side
at a time.
Hand tight and
do not use thread lock
at any of these bolts.
To Next Page
Loading...