Aurora T700 - Lower Fairing Brackets

32
Mount the lower fairing
brackets on the bike using
the supplied bolts.
Please note that on the left
side you have to put the
included spacer between
the bracket and the
lower mounting position
(red circle).
Install the M6 bolt on top
(green circle) and the M5
bolt on the bottom (yellow
circle).
Install the M6 Dzus clip on
the slot of the bracket (blue
circle).
Apply a bit of thread lock
and torque them according
to specications.
Thead lock: Loctite 243
or Permatex Blue
Torque values: M5: 8Nm
M6: 10Nm
16. LOWER FAIRING BRACKETS