Aurora T700 - Removing the Side Panels

Start dissasembling the bike
by removing the side panels.
Use an 8mm wrench to
remove the six indicated
bolts.
The green arrows indicate
the three bolts that secure
the radiator guard on the
inside of the panel.
Push the panel towards the
rear of the bike to release
it from the securing slots.
Before removing the panel,
disconnect the turn
indicator.
2. REMOVING THE SIDE PANELS
T700 Rally kit installation manual. Aurora Rally Equipment PLC
web: aurora-rally.com, phone: +30 210 60 25 003
5
Remove the plastic clips
by pressing the pin in the
middle.