24
Troubleshooting
Problem
Burners will not light using
a match
Low flame or low heat
Flames blow out
Flare up
Persistent grease fire
Possible Cause
Burners not assembled correctly.
Gas supply is turned off.
Gas supply connection is loose.
Obstructions in Burners.
LP Gas supply is not completely
open.
High or gusting winds
.
LP Gas supply is not completely
open.
Grease build-up.
Excessive fat in meat.
Grease trapped around burner
system.
Solution
See re-assembly after cleaning in Care and Maintenance.
Turn on LP gas supply.
Properly connect the LP gas supply as described in the
section “Connecting to the LP Gas Supply”.
See “How to Clean Burners” in Care and Maintenance.
Fully open LP gas supply.
Turn front of grill away from wind or increase flame
height.
Fully open LP gas supply.
Clean grill.
Trim fat from meat before grilling.
Turn Control Knob “Off” then disconnect the LP gas supply.
Open Hood carefully and let fire burn out. After the grill
cools, remove and clean all parts.
If your problem is not resolved from the information provided above,
p l e a s e v i s i t o u r w e b s i t e @ w w w . a u s s i e g r i l l s . c o m o r c a l l C u s t o m e r S e r v i ce a t 1- 8 0 0 - 2 51 -75 5 8 .
If you need a replacement part under warranty, a proof of purchase will be necessary.
To Next Page
Loading...
