AUSTRALIAN MONITOR AMIS480P - Technical Specifications

PAGE 10 AMIS480P INSTALLATION & OPERATION MANUAL
SPECIFICATIONS
OUTPUT POWER (1% THD, all channels driven) 4 x 80W
FREQUENCY RESPONSE (1W) 80Hz - 20kHz
POWER BANDWIDTH (-3dB) 85Hz - 20kHz
THD (1kHz, -3dB) Less than 0.5%
S/N RATIO 94dB (ref 100V)
CROSSTALK
1kHz 80dB
20Hz - 20kHz Better than 60dB
INPUT SENSITIVITY 0.775V RMS (0dBu)
INPUT IMPEDANCE 20KΩ
VOLTAGE GAIN (pot at max)
100V out 129 (42dB)
70V out 90 (39dB)
4Ω out 23 (27dB)
OUTPUT REGULATION (1kHz) 95%
DIMENSIONS (h x w x d) 88mm x 483mm x 432mm
(4.36” x 19” x 17”)
WEIGHT 20kg (44lb)
SHIPPING DIMENSIONS (h x w x d) 230mm x 540mm x 550mm
(9.1” x 21.3” x 21.7”)
SHIPPING WEIGHT 24kg (53lb)
ALL CHANNELS DRIVEN
CURRENT DRAW Mains Mains 24VDC IN
(230/240V) (115V)
IDLE 0.08A 0.17A 0.7A
1/8TH POWER 1.0A 2.1A 8.7A
1/3RD POWER 1.5A 3.1A 14.2A
FULL POWER 2.7A 5.7A 18.35A
ALL CHANNELS DRIVEN
THERMAL OUTPUT Watts BTU/Hr
IDLE 17W 58
1/8TH POWER 150W 512
1/3RD POWER 160W 546
FULL POWER 250W 854