LIIA0100E0-02.fm 1 AUTEC - Air Series
A8 - Configuration Menu
General instructions
General instructions
This manual aims at providing information to enable, disable and modify the features of Autec Air series' radio remote controls.
This manual and the “user manual” need to be fully read and understood by those who decide upon and/or modify the radio
remote control's features.
Contact Autec if any of the instructions and/or warnings provided in this manual are not clear.
No part of this manual may be reproduced, in any form or by any means, without written permission of Autec (including re-
cording and photocopying).
All operations described in this manual must be carried out by qualified technicians who are suitably trained with respect to
the relevant norms and laws.
As for instructions and warnings regarding the machine where the radio remote control is to be installed, follow the instructions
given in the machine's manual.
Symbol conventions
This manual contains two symbols that highlight special indications.
This symbol marks all extremely important indications and information: if they are not respected, this may result in
critical danger for people or property.
This symbol identifies all texts in the manual that shall be read carefully.
Caption
General Section
Signals
LED is off
LED blinks once in a second
LED blinks twice in a second
LED blinks three times in a second
LED is steady on
LED repeats 1 blink and an off phase
LED repeats 2 blinks and an off phase
LED repeats 3 blinks and an off phase
LED repeats 4 blinks and an off phase
LED repeats 5 blinks and an off phase
Pushbuttons
pushbutton is released
pushbutton pressed to first step
pushbutton is pressed
STARTFUNCT.
1
2
3
4
R
G
STOP
S1 S2
S3
LED 1
LED 2
LED 3
Red LED
green LED
LED 4
1
2
3
4
5
To Next Page
Loading...
