Dynamic Series
Part A: Description, warnings and instructions
Risk assessment
A - 6
The machine manufacturer and/or the person who decides upon radio remote
control use and installation is responsible for this risk assessment.
Autec cannot be held responsible if this assessment is not carried out correctly.
If required by the risk assessment, draw up protection measures to prevent, re-
duce and report potential hazard situations.
2.2 Working conditions
To guarantee correct radio remote control operation, all current regulations re-
garding safety at work and accident prevention should be respected. All applica-
ble standards and regulations valid in the user country regarding the use of both
the machine and the radio remote control must always be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful
working conditions.
To Next Page
Loading...
Need help?
General
