AUTEC E16 Series User Manual

4
WARNINGS FOR USE
!
!
!
!
!
!
!
!!
NEVER
LEAVE the
transmitting unit
unguarded when the
starting keyswitch
is inserted
Page 7
BE POSITIONED
in a way that
permits him to see the
“machine + radio remote
control” system,
and above all the
load, in the best
possible way.
VISUALLY
FOLLOW all
movements of the
machine and its load
remaining inside a
typical range of
action of the
machine
PAY
ATTENTION to
the entire work area.
Press the STOP
button in case
of hazard
ONLY
SWITCH ON
OR USE the
transmitter unit
when starting work:
improper use
could be
hazardous
SWITCH
OFF the transmitter
unit when work is
interrupted. Avoid
leaving the load
suspended in
the air (even
when changing
the battery)
NEVER
SWITCH ON OR
USE the transmitter
unit in closed spaces,
with the machine not
in sight, or outside
the typical range
of action
PRESS
immediately the
STOP button in
case of hazard
THE OPERATOR
MUST
ENGLISH
Before
using the radio
remote control
ALWAYS MAKE SURE
that the STOP
pushbutton
can be properly
moved
LIE16MU1

AUTEC E16 Series Specifications

General

Brand	AUTEC
Model	E16 Series
Category	Remote Control
Language	English